For this tutorial, I used Mcfts Windows XP Home Edition OS.
-What is it?- NetBIOS Hacking is the art of hacking into someone elses computer through your computer. NetBIOS stands for Network Basic Input Output System. It is a way for a LAN or WAN to share folders, files, drives, and printers.
-How can this be of use to me?- Most people dont even know, but when theyre on a LAN or WAN they could possibly have their entire hard drive shared and not even know. So if we can find a way into the network, their computer is at our disposal.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++ -[Step 1, Finding the target.]- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++ So first off we need to find a computer or the computer to hack into. So if your plugged in to the LAN, or connected to the WAN, you can begin. Open up Cain and Abel. This program has a built in sniffer feature. A sniffer looks for all IP addresses in the local subnet. Once you have opened up the program click on the sniffer tab, click the Start/Stop sniffer, and then click the blue cross
Another window will pop up, make sure All host in my subnet is selected, and then click ok.
It should begin to scan.
Then IPs, computer names, and mac addresses will show up. Now remember the IP address of the computer you are going to be breaking into. If you cant tell whether the IP address is a computer, router, modem, etc, thats ok. During the next step we will begin our trial and error.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++ -[Part 2, Trial and Error]- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
Now, we dont know if we have our designated target, or if we have a computer or printer, or whatever else is on the LAN or WAN. If you did get the IP of the target though, I still recommend reading through this section, for it could be helpful later on. Click on the start menu and go to run, type in cmd, and click ok. This should bring up the command prompt. From here we will do most of the hacking. Now I will be referring to certain commands that need to be inputted into the command prompt. I will put these commands in quotes, but do not put the quotes in the code when you type it into the prompt. I am only doing this to avoid confusion. Lets get back to the hacking. Type in ping (IP address of the target). For example in this tutorial, ping 192.168.1.103. This will tell us if the target is online. If it worked, it will look something like this (note, I have colored out private information):
IF it didnt work, meaning that the target is not online, it will look something like this:
If the target is not online, either switch to a different target, or try another time. If the target is online, then we can proceed.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++ -[Part 3, Gathering the Information.]- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
Now, input this command nbtstat a (IP address of target). An example would be nbtstat a 192.168.1.103. This will show us if there is file sharing enabled, and if there is, it will give us the: currently logged on user, workgroup, and computer name.
We have our just found our share name. In this case, under the share name is C, meaning that the only shared thing on the computer is C. Then to the right, under Type, it says Disk. This means that it is the actual C DISK of the computer. The C DISK can sometimes be an entire persons hard drive.
All's that is left to do is map the shared drive onto our computer. This means that we will make a drive on our computer, and all the contents of the targets computer can be accessed through our created network drive. Type in net use K: \\(IP Address of Target)\(Shared Drive). For my example in this tutorial, net use K: \\192.168.1.103\C. Ok, lets say that you plan on doing this again to a different person, do u see the K after net use? This is the letter of the drive that you are making on your computer. It can be any letter you wish, as long as the same letter is not in use by your computer. So it could be net use G..., for a different target.
As you can see, for my hack I have already used K, so I used G instead. You may also do the same for multiple hacks. If it worked, it will say The command completed successfully. If not, you will have to go retrace you steps. Now open up my computer under the start menu, and your newly created network drive should be there.
Now, if you disconnect from the WAN or LAN, you will not be able to access this drive, hence the name Network Drive. The drive will not be deleted after you disconnect though, but you wont be able to access it until you reconnect to the network. So if you are doing this for the content of the drive, I recommend dragging the files and folders inside of the drive onto your computer, because you never know if the target changes the sharing setting. If you are just doing this to hack something, then go explore it and have some well deserved fun!
Congratulations! Youre DONE!
-Commands used in this tutorial: PING NBTSTAT -a (IP Address of Target) NET VIEW \\(IP Address of Target) NET USE K: \\(IP Address of Target)\(SHARENAME) SCHOOL IS GOOD PEOPLE... STAY IN SCHOOL...
For this tutorial, I used Mcfts Windows XP Home Edition OS.
-What is it?-
NetBIOS Hacking is the art of hacking into someone elses computer through your computer. NetBIOS stands for Network Basic Input Output System. It is a way for a LAN or WAN to share folders, files, drives, and printers.
-How can this be of use to me?-
Most people dont even know, but when theyre on a LAN or WAN they could possibly have their entire hard drive shared and not even know. So if we can find a way into the network, their computer is at our disposal.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++
-[Step 1, Finding the target.]-
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++
So first off we need to find a computer or the computer to hack into. So if your plugged in to the LAN, or connected to the WAN, you can begin. Open up Cain and Abel. This program has a built in sniffer feature. A sniffer looks for all IP addresses in the local subnet. Once you have opened up the program click on the sniffer tab, click the Start/Stop sniffer, and then click the blue cross
Another window will pop up, make sure All host in my subnet is selected, and then click ok.
It should begin to scan.
Then IPs, computer names, and mac addresses will show up.
Now remember the IP address of the computer you are going to be breaking into.
If you cant tell whether the IP address is a computer, router, modem, etc, thats ok.
During the next step we will begin our trial and error.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++
-[Part 2, Trial and Error]-
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++
Now, we dont know if we have our designated target, or if we have a computer or printer, or whatever else is on the LAN or WAN.
If you did get the IP of the target though, I still recommend reading through this section, for it could be helpful later on.
Click on the start menu and go to run, type in cmd, and click ok.
This should bring up the command prompt.
From here we will do most of the hacking.
Now I will be referring to certain commands that need to be inputted into the command prompt.
I will put these commands in quotes, but do not put the quotes in the code when you type it into the prompt.
I am only doing this to avoid confusion.
Lets get back to the hacking.
Type in ping (IP address of the target). For example in this tutorial, ping 192.168.1.103.
This will tell us if the target is online.
If it worked, it will look something like this (note, I have colored out private information):
IF it didnt work, meaning that the target is not online, it will look something like this:
If the target is not online, either switch to a different target, or try another time. If the target is online, then we can proceed.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++
-[Part 3, Gathering the Information.]-
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++
Now, input this command nbtstat a (IP address of target). An example would be nbtstat a 192.168.1.103.
This will show us if there is file sharing enabled, and if there is, it will give us the: currently logged on user, workgroup, and computer name.
We have our just found our share name. In this case, under the share name is C, meaning that the only shared thing on the computer is C. Then to the right, under Type, it says Disk. This means that it is the actual C DISK of the computer. The C DISK can sometimes be an entire persons hard drive.
All's that is left to do is map the shared drive onto our computer. This means that we will make a drive on our computer, and all the contents of the targets computer can be accessed through our created network drive. Type in net use K: \\(IP Address of Target)\(Shared Drive). For my example in this tutorial, net use K: \\192.168.1.103\C. Ok, lets say that you plan on doing this again to a different person, do u see the K after net use? This is the letter of the drive that you are making on your computer. It can be any letter you wish, as long as the same letter is not in use by your computer. So it could be net use G..., for a different target.
As you can see, for my hack I have already used K, so I used G instead.
You may also do the same for multiple hacks.
If it worked, it will say The command completed successfully.
If not, you will have to go retrace you steps.
Now open up my computer under the start menu, and your newly created network drive should be there.
Now, if you disconnect from the WAN or LAN, you will not be able to access this drive, hence the name Network Drive.
The drive will not be deleted after you disconnect though, but you wont be able to access it until you reconnect to the network.
So if you are doing this for the content of the drive, I recommend dragging the files and folders inside of the drive onto your computer,
because you never know if the target changes the sharing setting.
If you are just doing this to hack something, then go explore it and have some well deserved fun!
Congratulations! Youre DONE!
-Commands used in this tutorial:
PING
NBTSTAT -a (IP Address of Target)
NET VIEW \\(IP Address of Target)
NET USE K: \\(IP Address of Target)\(SHARENAME)
SCHOOL IS GOOD PEOPLE... STAY IN SCHOOL...