Made in the USA!! THE NEW SCORPION..$150,000 USD...Gas Friendly Hittin the STREETS this FALL!!!*-*
Shem1 said
18:45 07/25 2008
You don't have to wait until next year!! Just Drop that $ 50,000 deposit and you can get yours! And whats even better is that the eco-exotic car can also perform too taking its 2,100-pound frame from 0-60 in no more than 3.5 seconds. All this eco-goodness costs a cool $150,000, but for a planet-loving luxury-lover, its quite a bargain!
In an announcement that's left us scratching our heads, newly-formed Ronn Motor Company has revealed a car, uniquely named "Scorpion" which they claim will get they 40 mpg, have a 3.5 second 0 to 60 time and have an over 200 mph top end. Furthermore, they state in a press release, it will be available to consumers this fall. Not impressed yet? It will be a hydrogen burning hybrid.
Hydrogen "burning"? Yes, burning. Let us explain. Employing "dual computer processor controls," the hydrogen, produced by "fracturing water molecules drawn from a small on board water tank," will be fed in through the air intake manifold and blended with gasoline in a 30 to 40 per cent ratio. Since one of the partners listed on their website is Hydrorunner, we believe theirs is the system being employed here. The engine said to be doing this gasoline mixed with hydrogen burning is an Acura dual overhead cam, aluminum/magnesium block, 3.5 liter, V-tech, V-6, Type S. All that equipment will be lovingly wrapped in a carbon fiber body produced by Metal Crafters and there will be all kinds of other cool, shiny bits. No price was mentioned.
The company, which has just recently begun offering public shares of stock, says it is in the process of designing a state-of-the-art, 40,000-square-foot plant near Marble Falls, Texas. There will be space for fabrication, mechanical assembly, body assembly, parts, testing, receiving etc. There are also plans for a 10,000-square-foot showroom. Of the car, vice president Adrian Pylypec, says, "The Scorpion is a proof of concept vehicle that helps solve consumer energy problems today and we expect will serve as a platform for our second generation vehicles." Seriously though: nice picture, but the website could use some work. Read the release after the jump.
For you car buffs that know all this means!! Technical Specifications Exterior HID Xenon Headlights LED side marker, signal and brake lamps Neon lighting in interior and engine bay Carbon Fiber Body Carbon fiber side mirrors 2 piece forged Modena wheels by MOZ 20 x 9 front - 20 x 11 rear Toyo Proxie Ultra High Performance T1R radial tires 255/30/20 front - 305/30/20 rear Engine 2008 Acura dual overhead cam, aluminum/magnesium block, 3.5 liter, V-tech, V-6, Type S Engine 289 Horsepower in stock form, 450 plus with the twin turbo option Hydrogen on demand system provided by - www.hydrorunner.com 6 speed close ration manual transmission, 6 speed sequential automatic available in 2009 Chassis Light weight cl**tch and flywheel Ronn proprietary refrigerated inter-coolers Limited slip differential 4 wheel Wilwood 12 inch disc brakes with cross drilled rotors and polished calipers Polished stainless spindles and control arms Custom race designed chrome moly chassis Indy car style: hybrid fully independent front and rear suspensions Custom Billet Polished hub carriers and axles from - http://www.dutchmanms.com/ Dual adjustable polished coil over shocks
About Ronn Motor Company Texas-based Ronn Motor Company was founded in 2007 by Ronn Maxwell and Adrian Pylypec
-- Edited by JamaicanShem at 19:47, 2008-07-25
MystiQ said
19:01 07/25 2008
this is a step in the right direction!!! car looks sick at profomrs sick.
In an announcement that's left us scratching our heads, newly-formed Ronn Motor Company has revealed a car, uniquely named "Scorpion" which they claim will get they 40 mpg, have a 3.5 second 0 to 60 time and have an over 200 mph top end. Furthermore, they state in a press release, it will be available to consumers this fall. Not impressed yet? It will be a hydrogen burning hybrid.
Hydrogen "burning"? Yes, burning. Let us explain. Employing "dual computer processor controls," the hydrogen, produced by "fracturing water molecules drawn from a small on board water tank," will be fed in through the air intake manifold and blended with gasoline in a 30 to 40 per cent ratio. Since one of the partners listed on their website is Hydrorunner, we believe theirs is the system being employed here. The engine said to be doing this gasoline mixed with hydrogen burning is an Acura dual overhead cam, aluminum/magnesium block, 3.5 liter, V-tech, V-6, Type S. All that equipment will be lovingly wrapped in a carbon fiber body produced by Metal Crafters and there will be all kinds of other cool, shiny bits. No price was mentioned.
The company, which has just recently begun offering public shares of stock, says it is in the process of designing a state-of-the-art, 40,000-square-foot plant near Marble Falls, Texas. There will be space for fabrication, mechanical assembly, body assembly, parts, testing, receiving etc. There are also plans for a 10,000-square-foot showroom. Of the car, vice president Adrian Pylypec, says, "The Scorpion is a proof of concept vehicle that helps solve consumer energy problems today and we expect will serve as a platform for our second generation vehicles." Seriously though: nice picture, but the website could use some work. Read the release after the jump.
For you car buffs that know all this means!!
Technical Specifications
Exterior
HID Xenon Headlights
LED side marker, signal and brake lamps
Neon lighting in interior and engine bay
Carbon Fiber Body
Carbon fiber side mirrors
2 piece forged Modena wheels by MOZ
20 x 9 front - 20 x 11 rear
Toyo Proxie Ultra High Performance T1R radial tires
255/30/20 front - 305/30/20 rear
Engine
2008 Acura dual overhead cam, aluminum/magnesium block, 3.5 liter, V-tech, V-6, Type S Engine
289 Horsepower in stock form, 450 plus with the twin turbo option
Hydrogen on demand system provided by - www.hydrorunner.com
6 speed close ration manual transmission, 6 speed sequential automatic available in 2009
Chassis
Light weight cl**tch and flywheel
Ronn proprietary refrigerated inter-coolers
Limited slip differential
4 wheel Wilwood 12 inch disc brakes with cross drilled rotors and polished calipers
Polished stainless spindles and control arms
Custom race designed chrome moly chassis
Indy car style: hybrid fully independent front and rear suspensions
Custom Billet Polished hub carriers and axles from - http://www.dutchmanms.com/
Dual adjustable polished coil over shocks
About Ronn Motor Company
Texas-based Ronn Motor Company was founded in 2007 by Ronn Maxwell and Adrian Pylypec
-- Edited by JamaicanShem at 19:47, 2008-07-25